- Stock: Out Of Stock
- Model: JIRE-13-CL-RD-GR-NO-ENC
This is the BASE ONLY of our Jumpire 13 foot classic round design, this trampoline is designed with specifications to deliver a strong bounce on a sturdy frame with secure safety enclosure netting. This is combined with our super premium safety padding to and foam covered enclosure poles enveloped in strong PVC, jumpers are protected from the poles and springs also. This size is ideal to fit in most gardens and a great addition to the family entertainment.
PLEASE NOTE however to use
this trampoline safely we recommend to only use with full enclosure
netting and poles, so this may suit being used to sink into ground as an
in-ground trampoline or if repairing an existing base to use with own
enclosure poles and netting.
or this trampoline can be purchased with enclosure included here,
thank you.
- 80 x 7" Springs - (3.2mm gauge steel)
- Frame constructed of 2mm thick galvanised steel 42mm tubing
- 30cm wide Super Premium Safety padding 25mm thick EPE foam pad
- Max Weight load 115Kg (18 Stone)
 |
This 13ft trampoline uses 7 inch springs made from 3.2mm gauge steel |
 |
Super Premium Safety padding with 25mm thick closed-cell EPE foam which is water & mildew resistant, covered in UV resistant & waterproof PVC, using gym quality 550g PVC on top and 350g PVC underneath. The pad is 30cm wide plus a 10cm flap to cover the frame. Elastic ties hold the pad in place underneath with reinforced stitching, these ties are both on the inside and outside edges, the flap which hangs over the outer edge of the frame is also fitted with a pull cord to secure it over the trampoline frame. |
| |
Jumping Mat made from Polypropylene (PP), the strongest, longest lasting material for trampolining. This Jump Mat has at least 6 rows of stitching holding the eyelets on for the springs |
 |
No weld used on the metal frame or poles - this eliminates the possibility of weld fatigue or rust appearing in these areas as can happen on many trampolines |